6Y94
Reference number 6Y94
Amputation Level Below-knee amputation
Distal Attachment Yes,
cushion
Adaptable and nourishing, a firm hold with the DVS

DVS – why not? The Dynamic Vacuum System for lower limb prostheses offers a comfortably firm hold, convenient volume management and good perception of the ground. The DVS liner completes the connection system. The magnet on the distal end connects to the vacuum pump. This extracts air from the socket with every step until an adequate vacuum is achieved. The DVS liner is available with a textile cover (6Y94=*) and a partial textile cover (6Y94=*-F). The liner can be reshaped at 60 °C in an oven for individual adaptation. The 6Y94 DVS liner can be combined with the Dynamic Vacuum System.

6Y94
Part Number 3C88-2
Adaptable and nourishing, a firm hold with the DVS

DVS – why not? The Dynamic Vacuum System for lower limb prostheses offers a comfortably firm hold, convenient volume management and good perception of the ground. The DVS liner completes the connection system. The magnet on the distal end connects to the vacuum pump. This extracts air from the socket with every step until an adequate vacuum is achieved. The DVS liner is available with a textile cover (6Y94=*) and a partial textile cover (6Y94=*-F). The liner can be reshaped at 60 °C in an oven for individual adaptation. The 6Y94 DVS liner can be combined with the Dynamic Vacuum System.

Product information

Dynamic Vacuum System

The 6Y94 liner has a special distal connector that establishes a direct connection to the vacuum pump.

Colour olive
Amputation Level Below-knee amputation
Distal connection special connection for the Dynamic Vacuum System
Material Copolymer
Socket design Specific weight-bearing socket and total surface weight-bearing socket
Distal Attachment Yes,
cushion
Shape Conical,
Cylindrical
The following table shows the available sizes of the 6Y94.
Model
6Y94
6Y94=S
6Y94
6Y94=M
6Y94
6Y94=MP
6Y94
6Y94=L
6Y94
6Y94=LP
6Y94
6Y94=XL
Residual limb circumference in mm [300 mm above distal end] 200–330 230–410 330–560 360–560 400–630 430–690
Residual limb circumference in mm [40 mm above distal end] 150–260 180–310 200–310 230–350 280–430 330–500
Shape Cylindrical Cylindrical Conical Cylindrical Conical Cylindrical
Documents and information

Brochures and information for the Dynamic Vacuum System can be found here.

Similar products